Konrad

cover

IMG_5008.jpg

plate_1.png

2025-06-15_fba340e434f548.jpg

0.2mm layer, 2 walls, 100% infill

klchidester7

20260530_084345.jpg

Major Change: The top of the threads are chamfered and an edge is added to help guide the threads. It is often too hard to get the cap onto the the sprinkler without these. Minor Change: I reduced the amount of filament used by a very small amount (which might be beneficial if you are printing many at once), but kept it strong by reinforcing it where it matters most. I also changed the material to PETG, since it can handle outside heat better than PLA.

0.2mm layer, 4 walls, Varied infill

Hunter Rainbird Orbitz Sprinkler Body Cap & Insert Plug

RainBird sprinkler cap to disable unnecessary sprinklers.

RainBird 1804 1806 sprinkler cap

ASIA

Print Profile(2)

Bill of Materials

Description

Comment & Rating (12)

This remix is based on

License

Related Models