Tesa Roller Center Piece Tape Dispenser - Free 3D Print Model

Search models, users, collections, and posts

Miro

Household>Office

IP Report

Print Profile(1)

All

X1 Carbon

H2D

P1P

P1S

X1E

A1 mini

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 15% infill

Designer

1.2 h

2 plates

4.8(18)

Open in Bambu Studio

Boost

110

394

306

Released

Description

Content has been automatically translated.

Show original

Replacement part for the center section of the tesa Easy Cut Economy tape dispenser, which fits into the tesa roll. May also work with other tesa dispensers. I assume that at least the Curve and Smart models have the same center section.

Two versions:

Standing, for a more aesthetically pleasing form with some support material
Lying down, with less support material and theoretically more robust due to layer orientation, but with a slightly less attractive print result.

tesa

tesa packaging tape

tesa spare part

Comment & Rating (31)

@kurisutofo.21

Boosted

Saved me from throwing away my Tesa/Tixo Roller. Little bit too small for my roll, but I increased the size by 3% and it turned out fine.

@user_3132942841

Print Profile

0.2mm layer, 3 walls, 15% infill

The profile uploader has replied

@Miro1337

Thank you! Were there any issues?

Show original

@user_3132942841

No problem I adapted the role for my purposes as it was slightly too wide I simply halved it in Bambu Studio and made it correspondingly narrower Best regards

Show original

@user_3132942841

Replying to @Miro1337 :

The diameter wasn't quite right It was a little too small I fixed it with tape

Show original

@user_2820988293

Print Profile

0.2mm layer, 3 walls, 15% infill

sturdier version is really sturdier and it works well. However the support area leaves residues and a not very nice looking surface.

The profile uploader has replied

@Miro1337

True, that's why there are two versions.

(Edited)

@Malchus

Print Profile

0.2mm layer, 3 walls, 15% infill

The part was very good for the Tesa roller. Very useful "part"

The profile uploader has replied

Show original

@Miro1337

Freut mich!

@user_4129503173

Print Profile

0.2mm layer, 3 walls, 15% infill

After adjusting the Y size slightly, it worked great 👌

The profile uploader has replied

Show original

@Miro1337

Freut mich!

@Montgomery_Burn

Print Profile

0.2mm layer, 3 walls, 15% infill

Worked very well and fits perfectly! 👌

(Edited)

The profile uploader has replied

Show original

@Miro1337

Freut mich!

@kurisutofo.21

Boosted

Thank you for inventing this model

The designer has replied

Show original

@Miro1337

You're welcome I'm really glad it helped you

Show original

@user_2522220103

Print Profile

0.2mm layer, 3 walls, 15% infill

Excellent. Thanks

The profile uploader has replied

@Miro1337

You're welcome :)

@user_4115274342

Print Profile

0.2mm layer, 3 walls, 15% infill

I had some problems with it. I ended up running it at 50%. Then it turned out well

Show original

@thiamo05

Print Profile

0.2mm layer, 3 walls, 15% infill

Printed well, only the support was quite difficult to remove

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.