Medicine Box for Home - Free 3D Print Model

Search models, users, collections, and posts

Aniken

Household>Other House Models

IP Report

Print Profile(2)

All

P1S

H2D

P1P

H2D Pro

X1E

H2S

X1 Carbon

P2S

H2C

X2D

A2L

A1 mini

0.2mm layer, 3 walls, 100% infill noAMS

10.8 h

5 plates

4.9(66)

82% version for A1 mini

6.2 h

4 plates

4.5(2)

Open in Bambu Studio

Boost

572

1916

1.5 k

919

Released

Description

This is a box for storing medicines for home use.

Printed by a single-color printer;

Approximate dimensions: 200x200, height 120;
Weight: approximately 450 grams;

For the kit, you need to print:

MedKit_Body.stl - 1 piece;
MedKit_Lid_Cross.stl - 1 piece (If you don't need a cross on the lid, then print MedKit_Lid_Solid.stl);
MedKit_Cross.stl - 1 piece (in red);
MedKit_Pin.stl - 2 pieces;
Plug-in_Shelf.stl - 1 piece.

The cross is mounted on the lid by pressing in.

Good luck printing, everyone!

Comment & Rating (85)

@user_3556446621

The pen for the lid is too short

Show original

@KlKo57

You are doing something wrong, everything fits together perfectly

Show original

@nicolasnichea

Excellent, I printed it with the A1 and each of the parts fit perfectly, there was no play. I did not modify the scales, but I did wait for the parts to cool down on the bed before removing them, so that they would not deform

Show original

@Cyberbreizh

Print Profile

0.2mm layer, 3 walls, 100% infill noAMS

Nice design Thank you very much

Show original

@jhonymiky

Print Profile

0.2mm layer, 3 walls, 100% infill noAMS

It looks great, although I didn't do the inside division Thank you

Show original

@Arl_Mont

Print Profile

0.2mm layer, 3 walls, 100% infill noAMS

Fresh off the printer! The details on this model are insane!

@Benneton1

Boosted

Print Profile

0.2mm layer, 3 walls, 100% infill noAMS

It turned out great! Everything fits perfectly, a 10/10 print! Thank you very much!!

Show original

@K_T_K_M

Print Profile

0.2mm layer, 3 walls, 100% infill noAMS

Printed in multiple colors for pills, bandages, and whatever else goes with them

Show original

@user_2912435570

Print Profile

0.2mm layer, 3 walls, 100% infill noAMS

the medical box came out well. Good for emergency supplies. For the pin i scales to 95% fits better. I tried 91% its too lose.

@Novis

Boosted

Print Profile

0.2mm layer, 3 walls, 100% infill noAMS

Nice :)

@aniken

Questions about the emblem on the lid are popping up on this and other websites. Why is it like that? A little background: when I was designing this box, I wanted a retro-style emblem on top. I started looking for some old standards. Among the old ones, I found a standard from 1974. Then I checked to see if first aid kits were actually produced with that emblem and found some sample images. Anyway, if you don't need a cross, there's a solid lid model in the archive.

(Edited)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.