Mean Girls Burn Book - HueForge Print

This is the most fetch thing you're going to be printing today.

Based on Mean Girls, this is a reproduction of the cover of the Plastics' Burn Book. Hang it up on a wall, use it as an actual book cover, the possibilities are ENDLESS. It only takes under 2.5 hours on a Bambulab P1P.

The included 3MF will have all required colour swaps for the AMS loaded already, if you're using Bambu Studio. If you're not, download the STL and follow the instructions below:

Print Instructions

Print at 100% infill with a layer height of 0.16mm with a base layer of 0.2mm

Filaments Used:

• PLA BambuLab Basic Jade White Transmission Distance: 5
• PLA BambuLab Basic Pink Transmission Distance: 8
• PLA BambuLab Basic Red Transmission Distance: 5
• PLA Bambulab Matte Charcoal Transmission Distance: 0.4

Swap Instructions:

• Start with Jade White
• At layer #7 (1.16mm) swap to Pink
• At layer #9 (1.48mm) swap to Red
• At layer #11 (1.8mm) swap to Charcoal for the rest.

_______________________________________

If you'd like to support me, I now have a Patreon!

Joining will give you behind the scenes information on WIPs, access to a private discord, early access, includes models that are otherwise paid, and more!

If you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my Patreon!

_______________________________________

If you like my work and would like to support me, you can now subscribe to a Thangs membership plan!, or if you prefer, my Patreon.

Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models.