H2C H2D Maintenance Drawer Toolbox Nozzle Vortek

UPDATE 3: 20.12.2025
ADDED NEW  PRINT PROFILE  - Nozzle Inlay
- fits vortek A and H nozzles
- now supports two sleeves and the stuff is easier to take out
-replaced the old inlay in the main files with the new one 
-added two more inlays for cables to the main file
 

UPDATE 2: 18.12.2025
ADDED NEW PRINT PROFILE  - 10cm high Bottom Drawer
ADDED INSTRUCTIONS 
 

UPDATE 1:
ADDED INLAY FOR THE CUTTING MODULE FOR THE H-SERIES

this is a remix of the SBOX
 https://www.printables.com/model/511649-sbox-for-mk234-drawers

-gridfinity compatible 
-u can print the middle drawers as many times as u want and stack it up…
-handles lock the drawers
-the drawers are compatible with gridfinity

-all parts needed are inside the link (if u dont plan on stacking up multiple boxes u basically just need m3 bolts)
-NOTE- the sidehandles are just for connecting multiple of these boxes

i just added a few things

-a bigger drawer fitting the cardboard bambulab accessory boxes
-inlays for h and A noozles including vortek, imbus and accesories
-a bambulab logo
-tweaked the print profile a lil bit

ADDED a small 0,5cm riser wich u can adjust in height… 
i use it  to lift up the inlays , so i can put the manual ptfe tubes and the stickers below the inlay 

i used these hex wrench handles 
https://makerworld.com/en/models/1273586-bambu-style-wrench-set-for-h2d#profileId-1304432


 

⚠️⚠️⚠️⚠️⚠️⚠️
Most of my profiles have optimized support settings!
If you change Nozzle or Layer Height make sure to adjust my settings for the support Z distance to ensure proper results.
⚠️⚠️⚠️⚠️⚠️⚠️
 

I would be super happy about a boost, your photos of the printed model and a 5 Star rating 
it really helps a lot and supports my work! 

💛💛💛💛💛