Su-47 -- Assembly Version
Print Profile(2)
Description
<Board Game Miniature Collection>--<Warship Collection>--<Aircraft Collection>--<Vehicle-Tank Collection>--<Aerospace Collection>
Membership
Su-47 -- Assembly Version
(Cockpit, wings, canards, landing gear, and bomb bay are movable; wings can be rotated backward to change shape)
Test printer, A1 mini -- Low-temperature stabilized build plate, Tuozhu PLA, 0.12 layer height, 2 walls, acceleration all 1000 or less, small part speed 80.
The model uses 46 grams of material and takes 6 hours and 23 minutes.
Due to material shrinkage and printing accuracy, sanding and gluing may be necessary; apply some pressure.
Remember to clean the PEI build plate before printing to ensure sufficient adhesion and that the material is dry.
Skirt is added by default. Those confident in their printer and material can turn it off; I did.
Many thanks to those who followed, liked, downloaded, and boosted this model.
Assembly instructions are shown in the images; follow the images to assemble.
1. Install the cockpit, engine, and cockpit cover.
2. Install the canards.
3. Install the wings.
4. Install the tail.
5. Install the landing gear.
6. Install the missiles and bomb bay cover.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (21)