Super Mario Bros Z - Metallix

A modification of Kimoiguess's Metallix model for multiple colour 3D printing, with a stand added.

Files:
The STLs are standard model files.
The 3MF contains colour data for multiple colour printing.
The 7z is the compressed blender project file pre export.

Printing:
Depending on the size you print the model at, you may want to use an adhesive to keep parts together, as at 100mm height I used small amounts of double sided tape to keep the model posed.
Depending on precision of your printer, you may want to print the neck join shorter, thinner, thicker etc.
I used a 0.4mm nozzle, if you print it smaller than the set 100mm height then you may want to use a smaller nozzle.
Change the filament flushing values based on your printer and filament, as I used the default values which were likely too high.
I printed at 0.08mm to 0.1mm layer height, which in hindsight was probably excessive.

Credits:
Mark Haynes - creator of Super Mario Bros Z
Kimoiguess https://kimoiguess.carrd.co - Original rigged model