Japanese Wave Clock (Seigaiha Style)

Japanese Wave Clock (Seigaiha Style):

Inspired by traditional Japanese aesthetics, this 3D-printed clock showcases an elegant wave pattern, 

reminiscent of the iconic "Seigaiha" design. 

The flowing curves symbolize peace, strength, and good fortune. 

The sleek clock hands contrast beautifully against the intricate backdrop, ensuring clarity and readability.

Perfect for home offices, kitchens, or as a delightful gift, the clock is designed for easy 3D printing, requiring minimal post-processing.

It is fully compatible with the MakerSupply Clock Kit-MH011, ensuring hassle-free assembly.

Attention! Unfortunately, variations in the dimensions of the clock mechanism may occur, in which case some adjustments to the parts will have to be made. 

The three printing plates result in a total print time of approximately 2 hours and 55 minutes. (Depends on the Printer and Profile used)

Assembly Instructions

1. Position the Alignment Pieces: Securely fit the alignment piece into the back of the cookie clock face, making sure they sit firmly in place.

   

2. Attach the Clock Face to the Stand: Carefully press the clock face against the stand.

   

3. Insert the Clock Mechanism: Place the clock movement into its designated slot, ensuring a precise fit.

4. Put on the Minute and Hour dials

   The most time the minute inditcator has an undersized hole, then you need to drill it up with an 3mm drill bit.

Print, assemble, and display a desk accessory inspired by traditional Japanese patterns, bringing peace, strength, and style to your workspace.