Ultraball Piggy Bank
Print Profile(1)
Description
Boost Me (for free)
Like my model? Give me a Boost! It's free!
The third design of the series! An Ultraball version.
This is probably the harder one of the original 4 to print. The yellow insert does in fact fit perfectly in the slot of the top, you will just have to hold it in place while the glue sets and dries a little.
As always, made to be printed without supports. I just strongly recommend printing the yellow insert at a snail pace for the first 6-7 mm with good bed adhesion.
Recommended print settings:
- 0.2mm layer height (0.12 for yellow insert)
- Slower speed for first 6-7mm for bottom and yellow insert pieces
- 3 perimeters
- 10% infill
- NO SUPPORTS NEEDED but if you're struggling on the top/bottom it may help
⋅.˳˳.⋅ॱ˙˙ॱ⋅.˳˳.⋅ॱ˙˙ॱ⋅.˳˳.⋅⋅.˳˳.⋅ॱ˙˙ॱ⋅.˳˳.⋅ॱ˙˙ॱ⋅.˳˳.⋅⋅.˳˳.⋅ॱ˙˙ॱ⋅.˳˳.⋅ॱ˙˙ॱ⋅.˳˳.⋅
Do you like my designs and want to support me?
Want to see what I'm doing early?
Wondering how to commercially sell 3d prints from my designs?
Want to have a say in what I work on next?
Join me on Patreon!
\/ Link part of the image \/
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)