Pokeball/Premier ball Piggy Bank
Print Profile(2)
Description
Boost Me (for free)
Like my model? Give me a Boost! It's free!
This idea was inspired by Flowalistik's Low-poly pokemon piggy bank.
I wanted to make sure it was printable without supports for ease of printing. You will have to glue the pieces together. This prints about 4" in diameter, but you should be ok scaling up if you want.
Side note: this could also be used to make a Premier ball if you printed in white and red instead. (Added pictures of one)
If you'd like to help me out or have permission to sell physical items from my designs, head over to my Patreon.
Recommended print settings:
- 0.2mm layer height
- Slower speed for first 6-7mm for bottom piece
- 3 perimeters
- 10% infill
- NO SUPPORTS NEEDED but if you're struggling on the top/bottom it may help
Assembly should be easy, just a little glue and eyeball aligning. I suggest doing a dry fit before gluing to be sure you have alignment correct.
⋅.˳˳.⋅ॱ˙˙ॱ⋅.˳˳.⋅ॱ˙˙ॱ⋅.˳˳.⋅⋅.˳˳.⋅ॱ˙˙ॱ⋅.˳˳.⋅ॱ˙˙ॱ⋅.˳˳.⋅⋅.˳˳.⋅ॱ˙˙ॱ⋅.˳˳.⋅ॱ˙˙ॱ⋅.˳˳.⋅
Do you like my designs and want to support me?
Want to see what I'm doing early?
Wondering how to commercially sell 3d prints from my designs?
Want to have a say in what I work on next?
Join me on Patreon!
\/ Link part of the image \/
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (24)