Hobbie_Of_The_Week

cover

IMG_20250613_225050635.jpg

IMG_20250613_225054892_HDR.jpg

IMG_20250613_225059451.jpg

IMG_20250613_225114706_HDR.jpg

plate_1.png

2025-06-13_425ffcc6c901b.png

A1 Mini  printer: A1 Mini Filament: PLA Basic nozzle:.2 quality: advanced: order of walls: outer/inner strength: Walls: 6 layers Strength: sparse infill: sparse infill density: 20% Support: enable support: Tree(auto)&nbsp;&nbsp;Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)

0.1mm layer, 6 walls, 20% infill

Stephen

PXL_20260301_052314499.jpg

PXL_20260301_052355824.MP.jpg

PXL_20260301_052410098.jpg

PXL_20260301_052423316.MP.jpg

PXL_20260301_052440260.jpg

PXL_20260301_052454627.jpg

PXL_20260301_052508020.jpg

PXL_20260301_052508020~2.jpg

So I Didnt change anything settings wise, but i did paint the model so its multicolor, there&#39;s a few areas i missed like the hair tie, and like a small section around the sock where the tan and the pink aren&#39;t quite perfect, but i really think it turned out quite well… keep in mind the original has 6 walls and a small layer height so the filament cost is quite high already and adding all these color changes does use a LOT of filament, as such i would recommend printing multiple, so you have more yield per color change, definitely don&#39;t recommend for single nozzle printers… as for other potential issues, i noticed a section of the supports did frequently fail, but it actually comes so close to other supports before its needed it usually recovers and can be cleaned up well, the fallen support doesn&#39;t mean its doomed…. like the original, it is very robust, and has a very good balance, this thing sits flat on its feet without any issue or rocking, and with those excessive walls, its hard to imagine a child being able to break it on accident… maybe on purpose, but not unintentionally… its a good original model though, great resolution, i just spent an hour to color it, and another hour to hunt down that last pixel that wasn&#39;t where it was supposed to be and causing unnecessary color changes… this can definitely be improved, i did it by hand and mine is not perfect, but thought it was worth sharing

5 Color, no changes to original settings

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Cheerleader, The line across her face was a slip on my printer and i don&#39;t currently have time to reprint the figure.

cheerleader

ASIA

Print Profile(2)

Description

Comment & Rating (9)

License

Related Models