Print Profile(3)
Description
Before printing, please ensure your filament matches the print profile.
Please ensure your build plate has good adhesion. If the build plate is greasy, it is recommended to wash it with dish soap and rinse with clean water, then spray with Povidone K30 solution or other glue suitable for your build plate.
=================================================
Uses: 6pcs 15mm x 3mm cylindrical magnets
During installation, two pairs should have the same orientation, and one pair should have the opposite orientation to distinguish the angle. If all three pairs are in the same direction, the angle does not matter. Choose the appropriate installation method according to your needs.
Double-sided tape or adhesive can be used to fix the outdoor side.
Available in wired loop and wireless loop versions.
The wired loop version allows you to tie a thin string through the fiberglass mesh to prevent the outer side from falling off or getting lost.
There is also a 90-degree elbow pipe to prevent backdraft.
Boost Me (for free)
Your boost is my biggest motivation when creating, thank you
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)