Izuku Midoriya
Print Profile(1)
Description
Project: Midoriya .hfp
Print with 100% infill, employing a 0.08mm layer height and a 0.16mm base layer
Model Dimensions: 193.94 x 200 mm
- Higher layer heights are permissible, provided the minimum depth of 0.48 mm is maintained
- The maximum depth is 3.3 mm, with an actual depth of 2.2 mm
Filaments Utilized:
- Bambu Lab PLA Basic Black - Transmission Distance: 0.6
- Bambu Lab PLA Basic Green - Transmission Distance: 2
- Bambu Lab PLA Basic Blue Gray - Transmission Distance: 3
- Bambu Lab PLA Basic Red - Transmission Distance: 4
- Bambu Lab PLA Basic Gold - Transmission Distance: 3
- Bambu Lab PLA Basic Jade White - Transmission Distance: 5
This model incorporates six distinct filaments
Filament Change Instructions:
- Initiate with Black filament
- At layer #8 (0.72 mm), transition to Bambu Lab Green
- At layer #9 (0.8 mm), transition to Blue Gray
- At layer #10 (0.88 mm), transition to Red
- At layer #13 (1.12 mm), transition to Gold
- At layer #19 (1.6 mm), transition to Jade White
Additional Information:
- This slider is configured for a mesh depth exceeding the necessary value This does not compromise the final mesh; removal is advisable if deemed necessary
- Border colors only from layer #41 (3.36 mm) onwards At this juncture, revert to Black filament for the remainder of the print
Project: midoriya .hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 193.94x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3.3mm and the Actual Depth is 2.2mm
Filaments Used:
Bambu Lab PLA Basic Black Transmission Distance: 0.6
Bambu Lab PLA Basic Green Transmission Distance: 2
Bambu Lab PLA Basic Blue Gray Transmission Distance: 3
Bambu Lab PLA Basic Red Transmission Distance: 4
Bambu Lab PLA Basic Gold Transmission Distance: 3
Bambu Lab PLA Basic Jade White Transmission Distance: 5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Bambu Lab Green
At layer #9 (0.8mm) swap to Blue Gray
At layer #10 (0.88mm) swap to Red
At layer #13 (1.12mm) swap to Gold
At layer #19 (1.6mm) swap to Jade White
This slider is set higher than the mesh depth It is not affecting your final mesh Consider removing it
Border Only Colors from here until the end
At layer #41 (3.36mm) swap to Black for the rest
Boost Me (for free)
If you appreciate this project, please consider boosting it! 💪
Si ce projet vous plaît, n’hésitez pas à lui donner un petit coup de pouce en le boostant ! 💪
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (9)