Panasonic/Leica Battery Holder/Case DMW-BLC12(E)

This 3D printable battery holder is designed specifically for Panasonic Lumix DMC-BLC12 / DMC-BLC12E batteries. It provides a secure and convenient way to store and manage your batteries.

Key Features:

• Secure Fit: Designed to snugly hold the 48x36x17mm battery. Yet it has a bit of space in every direction so it's not damaged or scratched.
• Easy Removal: A notch on the top edge prevents the battery from falling out and at the same time makes it easy to remove
• Contact Protection: If the battery is inserted with the contacts facing downwards, the contacts are protected by the case
• Universal Compatibility: While designed for the Lumix G70 battery, the 48x36x17mm dimensions make it compatible with other batteries of the same size (if there are batteries with the same size)

Printing:

• PLA or PETG recommended.
• No supports required.

Notes:

• Currently there are models for one and up to four batteries. If needed, I can add models for more batteries. Just let me know.
• The design prioritizes ease of printing.
• Inspired by https://makerworld.com/en/models/586353-sony-fw-50 

Compatible Cameras:

DISCLAIMER: I just Googled it, so check the battery of your camera, but in theory, these cameras should use the DMC-BLC12 battery.

• Panasonic Lumix DC-FZ1000II
• Panasonic Lumix DMC-FZ200
• Panasonic Lumix DMC-FZ300
• Panasonic Lumix DMC-FZ1000
• Panasonic Lumix DMC-FZ2000
• Panasonic Lumix DMC-GH2
• Panasonic LUMIX G DSLM DMC-G5
• Panasonic LUMIX G DSLM DMC-G6
• Panasonic LUMIX G DSLM DMC-G7
• Panasonic LUMIX G DSLM DMC-G70
• Panasonic LUMIX G DSLM DMC-G81
• Panasonic LUMIX G DSLM DMC-G91
• Panasonic LUMIX G DSLM DMC-GX8

As mentioned by @CapCrafter it also fits Leica Q batteries (BP-DC12).