NaughtyFrog

cover

f1-calendar-2026-gallery-countries.png

2026-f1-calendar - 4 (1).jpeg

2026-f1-calendar - 3 (1).jpeg

2025-06-16_eb075824d00e9.webp

version-dates-venues.png

version-countries-venues.png

Venue & Dates

plate_1.png

f1-calendar-2026-thumb-desktop.jpeg

Track Venues &amp; Race Dates<ul><li>0.2mm layer</li><li>2 walls</li><li>15% infill</li></ul>

AMS: Venues & Race Dates

Country & Venue

IMG_0330 2.jpeg

Country &amp; Venue<ul><li>0.2mm layer</li><li>2 walls</li><li>15% infill</li></ul>

AMS: Country & Venue

2026-f1-calendar - 1 (2).jpeg

Track Venues &amp; Race Dates - A1 Mini Version&nbsp;Special profile for non-AMS users with stops for manual filament swapping. Use filaments in this order:<ol><li>Start with Black</li><li>Switch to Red</li><li>Switch to White</li><li>Switch to Red</li></ol><ul><li>70% scale &amp; increased font size</li><li>17.5 cm x 15.4 cm</li><li>0.12mm layer</li><li>2 walls</li><li>15% infill</li></ul>

non AMS: Venue & Race Dates (A1 Mini only! auto pause)

Special profile for non-AMS users with stops for manual filament swapping. Use filaments in this order:<ol><li>Start with Black</li><li>Switch to Red</li><li>Switch to White</li><li>Switch to Red</li></ol>Venue &amp; Race Dates<ul><li>0.2mm layer</li><li>2 walls</li><li>15% infill</li></ul>

non AMS: Venue & Race Dates (auto stop for swapping)

Special profile for non-AMS users with stops for manual filament swapping. Use filaments in this order:<ol><li>Start with Black</li><li>Switch to Red</li><li>Switch to White</li><li>Switch to Red</li></ol>Country &amp; Venue<ul><li>0.2mm layer</li><li>2 walls</li><li>15% infill</li></ul>

non AMS: Country & Venue (auto stop for swapping)

Country &amp; Venue - A1 Mini Version&nbsp;Special profile for non-AMS users with stops for manual filament swapping. Use filaments in this order:<ol><li>Start with Black</li><li>Switch to Red</li><li>Switch to White</li><li>Switch to Red</li></ol><ul><li>70% scale &amp; increased font size</li><li>17.5 cm x 15.4 cm</li><li>0.12mm layer</li><li>2 walls</li><li>15% infill</li></ul>

non AMS: Country & Venue (A1 Mini only! auto pause)

Country &amp; Venue - A1 Mini Version<ul><li>70% scale &amp; increased font size</li><li>17.5 cm x 15.4 cm</li><li>0.12mm layer</li><li>2 walls</li><li>15% infill</li></ul>

AMS: Venue & Race Dates (A1 Mini)

raulmillr

Imagen de WhatsApp 2025-11-09 a las 00.05.32_7abcafd5.jpg

Imagen de WhatsApp 2025-11-09 a las 00.05.32_66f8673c.jpg

Imagen de WhatsApp 2025-11-09 a las 00.05.32_78e148ec.jpg

Achieve an incredible final finish with the perfect, smooth top coat!!!

Perfect and smooth top layer

Honza

2025-06-23_52b901e58ea2f8.webp

A1 mini AMS vesion 0.12mm layer, 2 walls, 15% infill

user_3309517977

IMG_20251027_222942.jpg

f1 with dates-layer height 0.2-AMS lite readya good balance in speed and qualityprinted in my a1 mini

0.16mm layer, 2 walls, 15% infill

JustCerealZzZ

WhatsApp Image 2025-10-18 at 08.54.08.jpeg

Formula 1 Calendar 2026 Country Venue A1 Mini  AMS ready.

0.12mm layer, 2 walls, 15% infill

A&D Creative desgin

Afbeelding van WhatsApp op 2025-03-03 om 16.32.14_bdb2a79d.png

Afbeelding van WhatsApp op 2025-03-03 om 16.32.13_a26a7aae.png

Afbeelding van WhatsApp op 2025-03-03 om 16.32.14_99f43f86.png

I wanted this calendar on the wall so i made a hook for it.

0.2mm layer, 2 walls, 15% infill

Stands

plate_2.png

Venue & Country

plate_3.png

Wordley PrintWorks

PXL_20260228_093510472.PORTRAIT.jpg

<h2>🏁 Premium Ironed Finish – Elevate Your F1 3D Printed Calendar</h2>Take your F1-inspired 3D printed race calendar to the next level with our professional ironing finish upgrade.&nbsp;Unlike standard 3D prints, which naturally show visible layer lines on the top surface, this version is carefully “ironed” during the final print pass. This process smooths and compresses the top layer, creating a cleaner, flatter, and more refined finish.&nbsp;<h3>Why Choose the Ironed Finish?</h3>&nbsp;✅ Smoother Surface – Reduced layer lines for a more polished look✅ Premium Feel – Looks and feels higher-end compared to standard prints✅ Better for Display – Ideal for desks, shelves, and office setups✅ Gift-Ready Quality – Perfect for F1 fans who appreciate detail&nbsp;The ironing process adds extra time and precision to the print, resulting in a noticeably cleaner top layer.&nbsp;If you’re displaying your calendar in an office, sim racing setup, workshop, or home office, the ironed finish gives it that extra touch of professionalism.&nbsp;I have also included additional plates providing the ironing settings for both the dates and location versions. For simplicity, I have also added the stands to the project to keep everything you need in one place.

AMS: Premium Ironed Finish

jurda5

20250810_075847.jpg

Venue Dates version which fits on A1 mini plate. <ul><li>AMS with three colors (red, black and white)</li><li>0.2mm nozzle for better details especially on the letters and numbers</li><li>0.1 layer, 15% infill, 4 walls</li></ul>

A1 mini (AMS), 0.2 nozzle, 0.1 layer, Venue Dates

Guto Gerardi

IMG_0687.jpeg

I made a thinner version that my friend requested. Only 3mm.Also added ironing on top surface to get a better result.

Slim Version + Iron 0.2mm layer, 2 walls, 20% infill

Mykola Motorsport

IMG_0661.jpeg

smooth surface (AMS)

plate_4.png

plate_5.png

plate_6.png

user_4271672685

photo_2025-12-18_14-30-12 (3).jpg

photo_2025-12-18_14-30-12 (2).jpg

photo_2025-12-18_14-30-12.jpg

photo_2025-12-18_14-30-11.jpg

4pcs A1 mini &#34;Big version&#34; with lightYou need 8mm light strip, and m2 brass inserts with m2 screws to assemble it.

4pcs A1 mini "Big version" with light

Frame

Tracks

Hugo-man

Image.jpg

Image (1).jpg

<ul><li>Tracks and frame print separately. Frame resized for add tolerance.</li><li>Main plate (country + venue) with paused added for swapping filament (black + red + white)</li></ul>For people who aren&#39;t afraid to use glue haha!Make sure to change the filament profile (if necessary) after the filament swapping.

non-AMS: Tracks+frame separated, country plate pause/swaping

Skrrt

IMG_2633.jpg

I don&#39;t have an AMS and I&#39;m too lazy to swap filaments. Luckily the base of this model is a thin flat sheet which can be turned into a mesh with the settings. The dates are a bit hard to see without good lighting so you can add an extra wall on the “Dates A1 Mini.stl” object and scale the height of it.  Or just pick a good colour. I later used a black permanent marker to colour the top. If you want the larger version, just import its geometry into this.

Meshed Background for the A1 Mini Version (Venue and Dates)

GinBerry3D

imagen_2026-01-20_150722807.png

Escalado para H2C cama completa, puede reescalarColores de Mercedes, fechas editables

Scaled for H2C full bed, you can rescaleMercedes colors, editable dates

AMG F1 MERCEDES BLUE

81f39694ea5927f4.jpeg.webp

smooth surface (No AMS)

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>This model took a long time to create - please consider boosting :)</boostcontent></boostme>The 2026 Formula 1 calendar is finally here featuring all updated circuits, countries, race dates or venue names (including the new Madrid circuit). Print it for yourself or as a gift for an F1 racing or motorsport fan with elevated circuit / tracks for all 24 grand prix&#39;s.&nbsp;Update 19th March 2026: Due to the war, F1 cancelled Bahrain &amp; Saudi Arabia Grands Prix. I have updated the calendar to reflect the changes. Happy printing!&nbsp;You can choose to show either race dates &amp; venues or countries &amp; venues.&nbsp;<img class="image_resized" style="width: 44.99%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000001511169/design/ac38729cbcbea06a.png">&nbsp;<img class="image_resized" style="width: 45.32%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000001511169/design/2bfaa67de5bc6f79.png">&nbsp;Printing:Easy to print (even with the standard 0.4 nozzle), 110g of filament in 3 ½ hours. I recommend a layer height of 0.2mm.&nbsp;PLA works great, I used the following colors:<ul><li>PLA Basic, Black (Baseplate)</li><li>PLA Basic, Red (Tracks, Venue Names)</li><li>PLA Basic, White (Countries, F1 Logo)</li></ul>A1 mini users: I just added the A1 Mini version. It has a size of 17.5 cm x 15.4 cm and slightly bigger fonts in comparison due to smaller size to print properly. A1 Mini version is 45g in 3 hours best printed in 0.12mm.&nbsp;Mounting: I have created a <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/models/1524315-f1-calendar-stand">dedicated stand</a>, perfectly fitting the F1 Calendar (both normal and A1 mini version). It&#39;s easy to print, only using 20g of filament.&nbsp;<a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/models/1524315-formula-1-calendar-stand-f1"><img class="image_resized" style="width: 49.93%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000001511169/design/2025-06-16_c03595d34b34c8.png">. </a>&nbsp;You can find it here: <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/models/1524315-f1-calendar-stand">https://makerworld.com/models/1524315-f1-calendar-stand</a>&nbsp;Non-AMS printing:If you do not have an AMS, I uploaded a special profile with stops for manual filament swapping. Use filaments in this order:<ol><li>Start with Black</li><li>Switch to Red</li><li>Switch to White</li><li>Switch to Red</li></ol>If you liked how the print turned out please share a picture of it - I would love to see it! Also this model took a long time to prepare, so please consider boosting if you have one available - its free!<boostme><boosttitle>Boost Me</boosttitle><boostcontent>This model took a long time to create - please consider boosting :)</boostcontent></boostme>

Print Profile(21)

Bill of Materials

Description

Comment & Rating (6207)

License