18mm Utility Knife - Free 3D Print Model

Search models, users, collections, and posts

Jan Štech

Tools>Hand Tools

IP Report

Print Profile(2)

All

P2S

P1P

H2S

X1E

X1 Carbon

H2D

H2C

H2D Pro

A1 mini

P1S

X2D

A2L

0.2mm layer, 3 walls, 25% infill

1.1 h

1 plate

4.6(27)

0.16mm layer, 3 walls, 15% infill

2.8 h

2 plates

3.4(17)

Open in Bambu Studio

Boost

343

796

1.1 k

679

Released

Description

A knife for DIY enthusiasts. After printing, it is necessary to break off the support from the front of the knife. Be careful when using the retractable blade, it's easy to get injured.

Blade

utility blade

knife

Comment & Rating (65)

@Jmacfarland

Hello! I remixed the model to remove the closed off tab which prevents the blade from protruding, along with PETG profile. I would like to upload the remix and link it to your model here, but you have Standard Digital File license which prevents upload of remixes. Would you be open to switching to a better license so I can upload this improvement?

@Tomcat2611

Print Profile

0.16mm layer, 3 walls, 15% infill

The model is nice and useful, but it needs some size adjustment

(Edited)

Show original

@Tomcat2611

I have modified the model and added the print profile, I hope it can be useful

(Edited)

Show original

@EMRECAN

A wonderful and stylish product, very useful and more than met my needs. Thanks to the designer, I wish you continued success. My Creality K1C 0.4 mm nozzle printer, Nanelab Hyper PLA orange, 0.12 mm layer height stock settings.

@misko903

Print Profile

0.2mm layer, 3 walls, 25% infill

I think enough for office use

@Jmacfarland

Print Profile

0.2mm layer, 3 walls, 25% infill

Supplied print has two issues - blade is physically prevented from exiting the holder by a solid piece of plastic, and the thumb slider with detents is too tight to move the blade at all without significant effort. I resolved the second issue by using a knife to shave off thin portions of the upper angled bearing surface, and corners off the slider's detents - this allowed the blade to slide as expected with less effort, while still retaining secure snapping to position.

@lucyferror

Print Profile

0.2mm layer, 3 walls, 25% infill

Printed in PETG. My second knife as first one works perfectly

@skyralysis

came out really cool, just broke a lil

@user_1049505511

Print Profile

0.2mm layer, 3 walls, 25% infill

perfect!

@dantesnr

Print Profile

0.16mm layer, 3 walls, 15% infill

I couldn't put the knife back together.

(Edited)

@cosine

Very good, but the slider was a bit tight, so I lowered it

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.