New Enclosure of Flashforge AD5X

he Printed parts are created by Flashforge, I sketched DXF file of enclosure based on it.

All panels are made of 3mm polycarbonate or acrylic panels

Besides you need to cut the panels which are cut by laser or CNC cutter, you also have to cut

3 pieces of 3mm panels with 273x180.5mm

You could buy the enclosure from Blurolls

The printed parts must be printed by at least PETG, 15% infill, perimeter wall ≥3

I printed the parts by using Filadock PETG, here is the link:https://www.filadock.com/?ref=PETERLU