manicman

cover

PXL_20250611_011100514.jpg

PXL_20250611_011036638.jpg

plate_1.png

plate_2.png

2025-06-11_6dde790d2d4e28.jpg

Printed with Overture ASA, and I used some custom settings on my ASA.  After printing the TPU bumpers just glue them onto the parts that touch car objects, the top and lower hook and the part that touches the silver gauge cluster bezel.  Slide it in from the top and then hook the bottom around the screen.  It holds tight.  I used a Scoche magnetic charger mount and it works awesome.  You can run the wire behind the screen and down the side of the panel to the cigarette lighter. &nbsp;I used a custom Overture ASA profile and slowed print speed down and went to 3 walls so the print isn&#39;t brittle.  I can&#39;t upload a custom profile so use the best settings you can find for ASA or print in another strong heat resistant filament.

0.2mm layer, 2 walls, 20% infill

This is for the larger widescreen C class cars.  This allows you to put your phone exactly where it can be seen without being in the way.

W205 C class phone holder - larger screen version

ASIA

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models