Anycubic Photon M3 MAX vat holder

The holder is designed for 20x20mm alluminium square profile, or 20x20mm allu extrusion. You can also decide if you want put the holder on top of the profile and have a cap, or put it on a longer profile with more versatility.

All parts are secured to the profile with M3x10 bolts and M3 nuts based on just pressure attachment. I recommend drilling hole to the alluminium profile and make screw for the screw itself for secure attachment. With the 20x20 extrusion, try the special nut that slots into the profile (I haven't tried it).

Base is attached with 4 screws.

You will also need:

• 4x M3x10mm bolt
• 4x M3 nut
• 20x20 profile (wood, alluminium, extrusion)
• 4 screws
• base (MDF board etc.)

Enjoy! Please consider supporting me, if you you find my designs usefull!