Diorama Street Fighter2 (Ryu Stage)

Here I share the RYU Diorama. This model is designed with multi-layer depth, textured clothing, and separate parts to achieve the finish and relief of a real collector's figure.

PRINTING INSTRUCTIONS & TOLERANCE TEST:

First, print Ryu's character and run the tolerance test. The base slots have a 0.25 mm offset from the characters and buildings. This value may be sufficient for you, or you'll need to increase or decrease it after testing with the values in photo . You'll need to correct the X-Y hole compensation.

The value you obtain should only be used when printing the platform( For me I used 0.05 ). 

Ryu and Ken need glue for some parts. In the 1 AMS version, I duplicated these parts because they are thin, in case they break when peeled off. All parts are oriented downwards for a better finish.

In the sky profile, you can find the yellow areas separately if you want to highlight these, just like the K.O. sign.

I have also added profiles in case you prefer keychains or magnets, or if you have 2 AMS. I hope you like it. Write me if you have any questions.

New Edition: Discover the latest high-detail models, new characters, and modular stages here: 

https://makerworld.com/en/collections/20276506-sf2-ultimate-edition

Guile Stage (Air Force Base): https://makerworld.com/en/models/2327858-guile-stage-air-force-base-sfii#profileId-2542973

COMPLETE THE ROSTER (Classic Edition): 

Do you want Dhalsim, Blanka, and the rest of the characters in their classic versions? 

You can find the entire Classic Edition collection here: 

 https://makerworld.com/es/collections/6887018-sf2-characters

If you prefer to put all the characters on this platform, it is available here: 

https://makerworld.com/es/models/1734893-street-fighter-2#profileId-1843161

🧵 Want to go the extra mile?

You can help me create and test new designs by joining my team! Support my work here:

https://ko-fi.com/luzia3dstudio