Search models, users, collections, and posts
The last of Us HueForge
IP Report
Print Profile(1)
0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill
Designer
8.9 h
1 plate
Open in Bambu Studio
Boost
53
84
2
0
42
7
Released
Description
INSTRUCTIONS
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 120.22x170mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PETG JAYO Gray Transmission Distance: 2.5
PETG GEETECH Gray Transmission Distance: 3
PETG JAYO White Transmission Distance: 6
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Gray
At layer #12 (1.04mm) swap to Gray
At layer #21 (1.76mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Share Alike
Comment & Rating (2)