Snuff Tobacco Container with Spoon - Free 3D Print Model

Search models, users, collections, and posts

Josef Vojtechovsky

Tools>Other Tools

IP Report

Print Profile(1)

All

A1 mini

X1 Carbon

H2D

P1P

P1S

X1E

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.12mm layer, 2 walls, 15% infill

Designer

44 min

1 plate

4.5(18)

Open in Bambu Studio

Boost

269

438

305

Released

Description

Inspired by the shape of contact lenses container I designed the snuff tobacco container with internal spoon compartment for my use. Fits perfectly in the pocket due its size. Safe with locking lid and screw in spoon.

No need for supports, not need for brims. Random seam is necessary. As it is tiny - I prefere to use thin layer.

Hope you enjoy it.

Comment & Rating (27)

@user_2631313260

Print Profile

0.12mm layer, 2 walls, 15% infill

Prints fantastic. Quick.

The profile uploader has replied

@JosefVojtechovs

Nice colour... THX

(Edited)

@ScarfaceBc

Print Profile

0.12mm layer, 2 walls, 15% infill

Hello everyone, Printed it in PETG and scaled it to 140% It worked perfectly! Really cool model !!!

Show original

@Kjamesforbes

Print Profile

0.12mm layer, 2 walls, 15% infill

the scoop is very small. would like the scoop to be bigger or options to print larger

The profile uploader has replied

@JosefVojtechovs

I don't know what you sniff, but tobacco is recommended in such small volumes. Otherwise it runs down to throat, that is not fine/nice. 🤔

(Edited)

@Kjamesforbes

Replying to @JosefVojtechovs :

is the model able to customize?

@JosefVojtechovs

Replying to @Kjamesforbes :

Not realy. Larger scoop will end up different complete parts... you can scale it, but.... I don't see aby use in significantly larger box. 🧐😯

@user_20153241

Print Profile

0.12mm layer, 2 walls, 15% infill

great

The profile uploader has replied

@JosefVojtechovs

Thank you. 😉

@Shupra

Print Profile

0.12mm layer, 2 walls, 15% infill

Printed perfectly and serves its purpose well. Nice little container.

The profile uploader has replied

@JosefVojtechovs

Thank you. I found out, that the spoon has bad surface, compared to the same spoon on my other 'Keychain Container' where the result Is beautifuly clear... The reason is taller body, that slows down the print of spoon itselves. Therefore slowing down the print or putting small brick next to the spoon will help here. 🤔

@uketsu

Great model, thank you!

The designer has replied

@JosefVojtechovs

I thank you for your words.

@Kivi2K

Print Profile

0.12mm layer, 2 walls, 15% infill

tryed printing it 3 times, always the scoop failed. (i did the filament drying things and cleaned the table) other than the scoop great model :)

@user_3413413204

Print Profile

0.12mm layer, 2 walls, 15% infill

To try it

(Edited)

Show original

@user_3554496467

Print Profile

0.12mm layer, 2 walls, 15% infill

@praxis1988

Print Profile

0.12mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Quick-Slip Shoe Horn

Stag 3D

23.9 k

7.8 k

Ultimate Gridfinity Kitchen Drawer Organizer

Valorian

28.3 k

9.1 k

Kitchen Utensil Holder

UniversalMaker

25.2 k

11.8 k

Dragon Egg Container

NUKDDD

29.9 k

8 k