Search models, users, collections, and posts
small Parking Disc AMS version
IP Report
Print Profile(2)
all on one build plate 0.10mm
Designer
1.9 h
1 plate
one part per build plate
Designer
4 h
6 plates
Open in Bambu Studio
Boost
87
234
46
28
427
314
Released
Bill of Materials
Bambu Filaments
Select all
Description
This is a small parking disc (104x104x4.6mm).
You will need an AMS to print it, as all labeling is embedded and not raised.
It's just clips together, but I recommend using a few drops of super glue.
When the tolerances are to small for your printer, use one of the bigger tolerances backsides.
Please consider using a heat resistant filament, PETG should be fine.
There is also a front side with only a small “P”, so you have more room for your own logo or text.
Boost Me (for free)
If you like this model, please consider giving it a boost! Your support helps a lot.
Membership
See memberships options for commercial print licenses (remixes excluded).
Join
License
If you want to use this model commercially, please join my membership.
Join Now
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
Comment & Rating (46)