3DMN

cover

instruction-_5c2ac83f-38df-4795-9c0a-44eaaed6829b.jpg

instruction_b9867619-b8cc-4793-b48e-787d7192e001.jpg

instruction-detailed_9a948bd5-f986-4020-a1ce-23acc474199c.jpg

plate_1.png

plate_2.png

plate_3.png

plate_4.png

plate_5.png

plate_6.png

plate_7.png

plate_8.png

plate_9.png

plate_10.png

plate_11.png

plate_12.png

IMG_6914.webp

plate_1.webp

plate_10.webp

plate_11.webp

plate_12.webp

plate_2.webp

plate_3.webp

plate_4.webp

plate_5.webp

plate_6.webp

plate_7.webp

plate_8.webp

plate_9.webp

0.4mm nozzle 0.2mm layer height 4 walls 10% gyroid infill 8 top, 6 bottom layers

0.2mm layer, 4 walls, 10% infill

<h4>0.4mm nozzle 0.2mm layer height 4 walls 10% gyroid infill 8 top, 6 bottom layers</h4>

goldiesvinyl

IMG_1213_3beb3a2f-7106-40ee-b2aa-07e5f52b83cc.webp

Stronger screws

hulq91

2025-09-14 11_07_35-UltiMaker Cura.png

After many issues with the original screws (which broke before tightening the parts together, because the female part of the thread was too tight for the male part) i made little optimization on Male parts :)&nbsp;Standards screws are now with :<ul><li>0.12 mm layers</li><li>4 walls</li><li>Diameter of the threaded part only slightly reduced to minimize friction&nbsp;</li></ul>Locking screws are now with :<ul><li>0.12 mm layers</li><li>4 walls</li><li>global X and Y scale  slightly reduced to minimize friction (98,5%)</li></ul>

Stronger Screws (More walls, thiner layers, scale update)

wtflo93

WhatsApp Image 2025-10-10 at 10.44.19 (3).jpeg

WhatsApp Image 2025-10-10 at 10.44.19 (1).jpeg

WhatsApp Image 2025-10-10 at 10.44.19.jpeg

WhatsApp Image 2025-10-10 at 10.44.19 (2).jpeg

WhatsApp Image 2025-10-10 at 10.44.20.jpeg

WhatsApp Image 2025-10-10 at 10.57.34 (2).jpeg

WhatsApp Image 2025-10-10 at 10.57.34 (1).jpeg

WhatsApp Image 2025-10-10 at 10.57.34.jpeg

WhatsApp Image 2025-10-10 at 10.57.33.jpeg

WhatsApp Image 2025-10-10 at 11.03.30.jpeg

I had problems with the screwheads and threads breaking off when tightening the screws (see picture of black screws), so i tried printing them horizontally. The changed orientation of the layers  makes the screws less susceptible to torsional stress. Even iff a screw breaks it will be a lot easier to remove than vertically printed screws.&nbsp;Tip: For easy assembly, first insert the screws into each component individually and turn them a few timesUnder heavy load, the layers could separate from each other, but the screw usually remains stable (see last picture. The Screw in the neck is not visible so i didnt exchange it)

Reliable screws (printed horizontally)

<boostme><boosttitle>Boost Me</boosttitle></boostme><figure class="image image_resized" style="width: 23.05%"><a href="https://ko-fi.com/3dmnn" target="_blank" rel="noopener noreferrer ugc"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000150592/design/2e7cac12-aed5-468e-8855-ca58eedb750b.png"></a></figure><h4 style="text-align: center">Want to use my models commercially or just say thanks with a coffee? Visit: <a target="_blank" rel="noopener noreferrer ugc" href="https://ko-fi.com/3dmnn">https://ko-fi.com/3dmnn</a></h4><h4>Print used around 0.9kg of PLA with 100% height: 40 cm 0.4mm nozzle 0.2mm layer height 4 walls 10% gyroid infill 8 top, 6 bottom layers</h4>

Brick Giant Skeleton

user_3939170004

articulated skeleton

mercertom

PXL_20251102_020025398.jpg

croppedcouch.jpg

PXL_20251102_015740489.jpg

PXL_20251102_020018689.jpg

PXL_20251102_020100343.jpg

PXL_20251029_001121554.jpg

Giant Skeleton Guy PETG Brick Glow in the Dark

ASIA

Print Profile(5)

Bill of Materials

Description

Want to use my models commercially or just say thanks with a coffee? Visit: https://ko-fi.com/3dmnn

Print used around 0.9kg of PLA with 100%
height: 40 cm
0.4mm nozzle
0.2mm layer height
4 walls
10% gyroid infill
8 top, 6 bottom layers

Comment & Rating (550)

License

Remixes (5)

Related Models