PoseLight - Flower edition

PoseLight - Flower edition

Right on the coattails of my previous PoseLight model, the cutesy version!

This version was kicked off by my art inclined brother (always the visionary), with a subtle: “You know.. that would really easily be made into a flower”.

All the hardware you need is the Led light kit 001 and some steel balls/Lug nuts for weight.

ps. I would print the “soil” part with a textured PEI, it gives it some texture and more of a soil type vibe.

pps. Like the OG poselight, i have only printed this in Matte PLA.

I have included two versions, 

1. AMS version
2. Non AMS version with added pauses, so that you can swap the filament mid print (at the pause) to achieve the the same result.

Instructions:

1. Assemble your printed parts

   

    

   2. Start by connection the joints together, this may take some elbow grease!

   

   

   

    

   3. Insert the led into the mesh part

   

    

   4. Connect the stem and align the joints/cable

   

   

    

   5. Gently work the cable into the stem, i used a coin i picked up from a combat zone.

   

   

    

   6. Snake the usb plug through the soil part

   

   

    

   7.  Snake it through the pot. When inserting the soil part into the pot, make sure to align the stem groove with the groove in the pot!

   

   

   

    

   8. Once done, add something small and heavy inside for weight. Otherwise he flower wont stay upright when bent. 

   I used a handful of these nuts.

   

    

   9. Cork it up the with bottom part

   

   

    

   10. Last step is to add the crown to your flower

   

   And voila! 

Was this whole model made as a convoluted preface for a deez nuts joke?