Japanese warrior - 2 colour - hueforge

Japanese Warrior 2 colour hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x200mm in size
IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT

You may print at higher layer heights below the Base Thickness of 1.12mm
The Max allowed Thickness is 3.36mm and the Actual Thickness is 1.76mm

Filaments Used:

    #000000 PLA Sunlu Matte Black  Transmission Distance: 0.1
    #ffffff PLA sunlu white  Transmission Distance: 6.8
This print uses 2 unique filaments

Swap Instructions:
    Start with Matte Black
    At layer #14 (1.2mm) swap to white for the rest.