Through the Eye of a soldier - hueforge -4 colours

Through the eye of the soldier 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT

You may print at higher layer heights below the Base Thickness of 0.88mm
The Max allowed Thickness is 3.36mm and the Actual Thickness is 3.2mm

Filaments Used:
    #000000 PLA Sunlu Matte Black  Transmission Distance: 0.1
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #eee82f PLA Bambu Yellow  Transmission Distance: 6
    #ffffff PLA sunlu white  Transmission Distance: 6.8

This print uses 4 unique filaments

Swap Instructions:
    Start with Matte Black
    At layer #15 (1.28mm) swap to Red
    At layer #23 (1.92mm) swap to Yellow
    At layer #31 (2.56mm) swap to white for the rest.