Lain Li O11 Dynamic EVO XL EKWB FLT120 D5 Mount

This mount is intended to nicely fit under the power supply in a Lian Li O11 Dynamic EVO XL case. This works by bolting to the holes where the removable drive tray goes. It prints in 2 pieces to help with strength and needs to be bolted together. 

Install Instructions:

1. Mount the 2 printed pieces together with 3 M5x16 bolts and nuts.
2. Mount the pump/res combo to the bracket using the bracket mounting bolts that came with the Pump/res combo.
3. mount entire unit to the case with 4x M5x16 bolts and nuts.

Hardware Needed:

• 7x M5x16 bolts
• 7x M5 nuts
• Recommended to use washers as the pump does vibrate
• Bolts included with EKWB FLT 120 D5/DDC 

Note: This does also fit in the space above the power supply but in my case the bottom case mounting holes are slightly off. It should still work with M3 bolts.

This is my first design I have ever made and shared so PLEASE let me know if you need any assistance. I hope you enjoy it!