Donkey Kong Barrel Mug
Print Profile(4)
Description
By request, a mug version of my Donkey Kong Barrel. It's designed to fit a clear 18 oz Solo cup as a liner.
Versions
- Left-handle and Right-Handle variants
- Solo Cup Version - Designed to fit an 18oz Solo cup. Top diameter: 93mm, Depth: 117.5mm, Base Diameter: 86mm
- 12 oz Soda Can Version - Width sized to fit a 12 oz soda can. Top Diameter: 70.8mm, Depth: 88.5mm, Base Diameter: 65mm.
Instructions
- The parts are arranged by color. The bands need to be printed twice. Everything else needs to be printed once.
- Install the bands onto the barrel first. They need to be installed before the handle is installed. It snaps snugly in place - glue should not be needed.
- The yellow lines should snap in to the red DK. It's a pretty snug fit - glue is optional here.
- Carefully line up the triangle and it should snap into the barrel body. You may want to use glue for this.
- The two horizontal cylinders should screw into the side of the barrel. Be careful to line up the start of threads. Glue won't be necessary for this.
- The vertical part of the handle should fit over the two cylinders. You'll need glue to secure this.
Parts
- Solo 18-oz clear cup. I bought this: [Wal-mart]
- Glue. I used superglue on just the handle.
NOTE: I'm sure this can easily be scaled to fit other sizes but I don't have any other sizes on hand. If anyone wants to give me measurements I can get profiles set up for other cup sizes.
Boost Me (for free)
If you're feeling generous and like what you see, Buy Me a Coffee or Send me a tip.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (74)