EREN, MIKASA, ARMIN, LEVI
Print Profile(1)
Description
EREN, MIKASA, ARMIN, AND CAPT LEVI
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.08mm and the Actual Thickness is 2.06408mm
Filaments Used:
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
#977133 PLA+ Sunlu Coffee Transmission Distance: 3
This print uses 4 unique filaments
Swap Instructions:
Start with Black At layer #9 (0.88mm) swap to Blue Gray
At layer #13 (1.2mm) swap to Jade White
At layer #16 (1.44mm) swap to Black
At layer #19 (1.68mm) swap to Coffee for the rest.
Frame is BambuLab PLA Matte Marine Blue
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)