Lithophane box (10x7,5 cm) for 2835 SMD Led Chip

Turnable lithophane box vs changable frames for 5V 3W USB LED Lights 2835 Chip. A good way to find the best light for your images.

No supports or screws needed, only a bit of glue. Glue free (and free from supports, screws, etc.) model are on it's way, and will be published when I find a time to finish it.

Made for 10x7,5 cm lithoplanes vs frame thickness 3 mm. Other sizes of box (10x10 cm, 12x15 cm, etc.) could be added, if You have an interest about it. Other boxes exist only virtually - are not printed out, this is the only one printed so far, a great working model.

Lithoplane Maker: https://tool.itslitho.com/UploadImg

Images 4:3 must be used for this box. 

Most of options not mandatory, only the size and partly the thickness are important.

USB LED light (32 mm diameter): https://www.aliexpress.com/item/1005008119628598.html

These or similar chips with and without cable and switch can be easily found in any electrical shop. They are widely used in LED bulbs. Just make sure the diameter is 32 mm or less.

A small piece of double-sided adhesive tape is needed, too.

The white rings is idea fix, originally ring is only one - glued under the box, an it is (or was) black  … :)

This is how original model looks:

Feel free to use it as You like!