schiko

cover

2023-09-20_aq23k4q4d9uh.jpg

plate_1.png

plate_2.png

plate_3.png

1.JPG

<ul><li>Arachne!</li><li>Brim for box and lid recommended</li><li>3 walls</li><li>First layer slower for better surface of the DREMEL-Logo</li><li>Textured plate looks much better</li><li>Seal has to printed in TPU,TPE</li></ul>

0.2mm layer, 3 walls, 15% infill, multicolor

Mr_The_T

Bild_2024-12-28_111552499.png

Bild_2024-12-28_111703246.png

bcaeb76e-571b-4991-9c74-b8319af33a22.jpeg

I recommend using a textured PEI plate as the print is diagonal.I had to work within the confines of the bed, so the surface finish is slightly rougher than with a flat print, and the logo doesn&#39;t show well, but some light sanding should do the job.

A1 Mini - no colour - 0.2mm layer, 4 walls, 15% infill

Rugged Box (Parametric)

Remix of <a target="_blank" href="https://www.printables.com/model/258431-rugged-box-parametric" rel="nofollow noopener">Whity's Parametric Rugged Box</a> (Printables).You need 6 M3x30 screws. I used Allen set screws for a better look.Best to be printed with a multi colour printer. The .3mf file contains all objects and the pre-colored lid.I recommend 3 walls and brim to prevent warping, no support.&nbsp;I originally posted this model at <a target="_blank" href="https://www.printables.com/model/579978-dremel-lite-box-rugged" rel="nofollow noopener">Printables</a>.

Dremel Lite Box (rugged)

ASIA

Print Profile(2)

Description

Comment & Rating (151)

This remix is based on

License

Related Models