Two Cats Hueforge
Print Profile(1)
Description
This is a 7 color hueforge of an impressionist style painting of two cats. The original image was generated by @Pinkielicious on civitai
There are two pauses in the print profile for filament swaps so that this can be printed with a single ams unit. the first pause is about 4.5 hours in and the second is 6.5 hours in. Make sure to plan ahead for your filament swaps carefully, and take a screenshot of whatever you picked. For example, here's what I did for mine - At the first swap I swapped black out for yellow and green ice out for red. then at the second pause I swapped red out for beige:
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm
The Model is 133.33x200mm in size. feel free to scale the X or Y but do not change the Z dimension!
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Grey Transmission Distance: 2.8
PLA Jessie Premium Green Ice Transmission Distance: 11
PLA BambuLab Basic Orange Transmission Distance: 7
PLA BambuLab Basic Red Transmission Distance: 3.8
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Beige Transmission Distance: 8
This print uses 7 unique filaments
Swap Instructions:
Start with Black
At layer #4 (0.36mm) swap to Blue Grey (5B6579)
At layer #7 (0.48mm) swap to Green Ice
At layer #8 (0.52mm) swap to Orange
At layer #17 (0.88mm) swap to Red (E61515)
At layer #18 (0.92mm) swap to Yellow
At layer #23 (1.12mm) swap to Beige
At layer #28 (1.32mm) swap to Blue Grey (5B6579) for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)