Search models, users, collections, and posts

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.12mm layer, 3 walls, 25% infill

59 min

1 plate

4.9(20)

Open in Bambu Studio

Boost

277

235

Released

Description

Summary

Paddle holder. Simple replacement part for a rice cooker.

Onshape:
https://cad.onshape.com/documents/990c39e3b656cc9a1405262e/w/d6653f90a4c1f385688cb9b5/e/d2a46e1281792bf82275432e

If you can't print your own, please check out my store:

http://openbazaar.com/store/QmVFRGwApdcef56Be7FPXnXQaB79rYrve3otFsrWvSwbAu/rice-cooker-paddle-holder

http://openbazaar.com/store/QmVFRGwApdcef56Be7FPXnXQaB79rYrve3otFsrWvSwbAu

Print Settings

Printer:

3KU K3000

                                            Rafts:                      
Yes

Supports:

                                            Resolution:                      
.1mm

Infill:

10%

Post-Printing

Print in ABS, then vapor smooth for added strength and high gloss finish.

Comment & Rating (34)

@AeonJoey

Print Profile

0.12mm layer, 3 walls, 25% infill

perfect fit! thank you!!!

The profile uploader has replied

@MrAudio

You're more than welcome. Thanks for the reply & printing. Glad to hear it's a perfect fit

@Jason11166

Print Profile

0.12mm layer, 3 walls, 25% infill

perfect fit for the zojirushi rice cooker

The profile uploader has replied

@MrAudio

Thanks

@gophia

Boosted

Print Profile

0.12mm layer, 3 walls, 25% infill

Just what i was looking for. Printed very nicely.

(Edited)

@AlexCo3D

Print Profile

0.12mm layer, 3 walls, 25% infill

The model/profile were good but it doesn't fit a zojirushi FYI

The profile uploader has replied

@MrAudio

Fit our Zojirushi rice cooker

@Jacob_T

Print Profile

0.12mm layer, 3 walls, 25% infill

perfect replacement. I use a bit of hot glue to keep it stuck to the cooker.

The profile uploader has replied

@MrAudio

Awesome

@MrAudio

Glad to hear it

@AeonJoey

thank you so much for this! ours broke just now lol

@MrAudio

You're more than welcome. Thanks for the reply & printing.

@user_3282548450

Boosted

Thanks! only suggestion would be to add a little nub on the clip so it can't fall/jostle out of the ring on the rice cooker.

@readysetfyre

Boosted

Thanks. My paddle holders been broken for over 3 years and can finally print one for my zojirushi.

The designer has replied

@user_4065976317

Your welcome! Same happened to us. Tell others that might have the same problem.

@user_4026134480

Print Profile

0.12mm layer, 3 walls, 25% infill

for my Zojirushi rice cooker, I kinda had to push it in, and the first one I made with weaker filament broke from me trying to put it in, it also doesn’t stay in the rice cooker slot all the time, sometimes the rice Paddel will pull it out. other than that, it works 👍

The profile uploader has replied

@MrAudio

It's a Flawed design overall, but it's just like the original that the paddle falls out of & also breaks. Weak filament is never recommended for functional parts.