4L container filament drybox - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

Axelburn

3D Printer>3D Printer Accessories

IP Report

Print Profile(3)

All

P1S

H2D Pro

H2S

X2D

H2D

H2C

X1E

P1P

P2S

X1 Carbon

A2L

A1 mini

Official, PLA, 0.2mm layer, 2 walls, 15% infill

Designer

6.6 h

3 plates

5.0(8)

BASE COMPLETA

2.3 h

1 plate

4.9(59)

0.2mm layer, 2 walls, 15% infill

2.8 h

2 plates

4.9(9)

Open in Bambu Studio

Boost

378

1480

103

1.3 k

597

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

Micro Steel Deep Groove Ball Bearings

Circular Embedded Electronic Digital Thermometer Hygrometer

Description

Drybox for filament spools with a diameter of 200 mm and a maximum width of 65 mm.

To build it you can use a 4L food container that you can find on amazon. This is an exmaple: https://amzn.eu/d/gNHdxcL

I created this box modifying the original work of Leinich: https://makerworld.com/it/models/165093-dry-box-filament-box-for-vtopmart-container-4l?from=search#profileId-282399

Compared to the original design I added two additional containers for the silica gel in the central part and in the front part so that I can add more desiccant.

I also modified the lid to accommodate an hygrometer and a PC4-M10 fitting to fit the PTFE tube.

Finally I created a cap to put on the PC4-M10 fitting to seal the box when not iused.

As with the original model, the following components are required to build a single box:

1x PC4-M10 fitting
1x hygrometer
4x 608ZZ ball bearing

In the stl files I added two versions of the base: one complete with the front box and one without it in case you want to add the hygrometer inside the box on the front.
I also added three versions of the lid in order to accommodate different hygrometers with an angle of 0, 20 and 30 degrees.

Comment & Rating (103)

@user_1797287368

The construction needs to be reinforced

Show original

@sr.Alvarez

Print Profile

BASE COMPLETA

It works perfectly.

Show original

@user_552990432

Print Profile

Official, PLA, 0.2mm layer, 2 walls, 15% infill

works good, the lid was a little loose but I think that’s just my container being different.

@user_3013965747

as advertised works perfectly!

@WokkyNokky

Print Profile

BASE COMPLETA

Thank you!

@user_2404060024

Print Profile

BASE COMPLETA

fits big w 3.8 liter cereal container/ could use a hygrometer mount but glad it fits

@Aryan_Ahmed_786

loved this one so much that I had to develop on it further. tbh I think that ima develop on the decicant cartages further to help them absorb moisture even faster. I may also develop on the rollers so that it can include little hot glue spots so that the filiment moves less side to side. I also added little side flaps so that it would be easy to insert the filiment without needing to adjust it several times.

(Edited)