SSD Dock and Storage for Photographers and Videographers - Free 3D Print Model

Search models, users, collections, and posts

Daniel Rauber

Household>Office

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 2 walls, 15% infill

Designer

2.8 h

1 plate

3.4(5)

Open in Bambu Studio

Boost

255

233

122

Released

Description

A combined storage and docking solution for up to 5 Samsung T7 SSDs and two SD Cards, the perfect storage organizer for Photographers and Videographers. Allows easy access to all your drives in one place.

The top slots (4x SSD + 2x SD Card) are for storage only, while the bottom SSD slot is used as a drive bay for the active drive. A USB-C cable can be fed in from the back and held in place using a M3 screw and nut. Some cables might even stay in place with pressure fit.

Connector size on my USB-C / Thunderbolt cable with pressure fit: 12.25mm x 6.40mm (Amazon US / Amazon DE)

Comment & Rating (9)

@user_3094813094

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

No support problems when placed diagonally. Unfortunately, the dimensions are not correct so that no SSD fits. Do not print until this has been adjusted!

The profile uploader has replied

@rauberdaniel

That is a good hint with the diagonal printing. Thanks! The dock is designed for T7 SSDs by Samsung. The T5 as shown in the image might have different dimensions.

(Edited)

@vudographics

Boosted

Replying to @rauberdaniel :

Not sure what you mean by diagonal printing. Can you elaborate please. Newbie here. Thanks

@TeemuKoponen

Print Profile

0.16mm layer, 2 walls, 15% infill

works nicely with t7's, cable is a bit nifty to get in, going to look for a slimmer one and use a locking bolt. t7 shield does not fit in the slots, also would prefer the slots to be slanted on one side instead of straight to minimize rattle when ssd's are on the holder. solid print 4/5