Hue Forge Karikatur Black Sabbath
Print Profile(1)
Description
Hue Forge Caricature of the Band Black Sabbath
The image can be scaled, but the Z-value should remain unchanged!
Print with 100% infill, a layer height of 0.08 mm, and a base layer of 0.16 mm
The Model is 150x150mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
Filaments Used:
#000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6
#757575 PLA BambuLab Matte Nardo Gray Transmission Distance: 0.7
#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 3 unique filaments
Swap Instructions:
Start with Charcoal
At layer #13 (1.12mm) swap to Nardo Gray
At layer #19 (1.6mm) swap to Ivory White for the rest.
After a successful print, I would be very happy about feedback/like or boost.
Membership
Be fair if you sell my models and become a Commercial Member. If you want to buy me a coffee and support me a little, then become a Supporter
Boost Me (for free)
A Boost is always welcome
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (22)