Dramatic Finger Claws - Stone-cut version

🩷The New Edition of this design is out! Check out Finger Claws-Villainess Edition!🩷

Hey people! :)

So, I know this model is different from my other designs. But you know me, and you know I love everything dark and dramatic. So, I hope you enjoy it as much as I did! 

Are you like me, always working with tools and making stuff with your hands, and never able to enjoy long dramatic nails? Or maybe you've done a dragon or dark witch cosplay but your hands look bare compared to other parts of the outfit? Or do you wanna jazz up your hands for a party or rave but you're looking for a more dramatic, hardcore look? Fear not - cause these babies are exactly what you are looking for!💅:D

For this design, I had two goals in mind: comfort and cool looks. First of all, I needed them to print without any supports, because any residue of the support material could feel sharp on the hands. I also wanted to have a complete range of movement even after wearing them. So the results became these separate pieces of finger armor (or claws), that print without supports and are comfy to move with!

Instructions for sizing:

- First, get a ring that fits your middle finger perfectly. Measure the inner diameter of the ring. For example, for me, it's 18 mm.

- Open the 3mf project, select the dark semi-transparent cylinder (non-printable part), and size it uniformly (with the millimeter sizing tool) to be the same as your ring size (for example, 22 mm).

- Copy the scale of the sized cylinder. For the example of 22 mm, it would be 122.22% of the original cylinder.
- Select all the other objects, and scale them up to 122.22%.
- Now all of the printable objects should be uniformly sized you your hand. 
- Of course, all hands are different from each other, so if you feel that after printing some of the rings are not fitting for you, size them separately and print again.

Print Instructions:

- Print with 0.16 or 0.2 mm layer height. This print doesn't require support.

- For this print, the “brim” option should be on to ensure good adhesion between the parts and the build plate.

- Choose a metallic or silky filament for this stone-cut look.

I hope you enjoy it, and happy printing! :)🥂

If you really loved my work, you can always get me a coffee :)
(Commercial licences and high-quality renders also available on Ko-fi)