N* [Norkius]

cover

PXL_20250608_031710919.jpg

PXL_20250608_031719835.jpg

tinkercad.png

plate_1.png

plate_2.png

plate_3.png

plate_4.png

plate_5.png

plate_6.png

plate_7.png

PXL_20250608_031705153.jpg

0.16mm layer, 3 walls, 8% infill

PowerStone

MindStone

SpaceStone

RealityStone

TimeStone

SoulStone

150%

plate_8.png

SpaceStone150%

plate_9.png

RealityStone150%

plate_10.png

TimeStone150%

plate_11.png

SoulStone150%

plate_12.png

MindStone150%

plate_13.png

PowerStone150%

plate_14.png

InfinityStone

plate_15.png

Kosh

IMG_3924.jpg

IMG_3926.jpg

IMG_3927.jpg

I wanted more realistic infinity stones, so I used the stl model from here:  <a target="_blank" rel="noopener noreferrer ugc" href="https://www.printables.com/model/1271345-infinity-stones">https://www.printables.com/model/1271345-infinity-stones</a>&nbsp;I then cut the original faceted stones in half horizontally and joined them together with these rougher looking stones. I also scaled them to match the size of the original faceted stones. That way they easily glue into the recesses on the gauntlet model.&nbsp;There is still more work that could be done on the original faceted bases to make make them thinner and cut off the excess, would be better if the stones looked like they were inset a bit more and the bases were hidden. &nbsp;The green stone on the thumb is the worst fit, may be due to the actual model (scan?) being a little wonky there.&nbsp;The profile contains additional plates with everything scaled to 150% and individual stones ready to print in different colors. Note that the filling options are different for the stone object vs the glove. I also changed the support type to avoid breakage of the tree supports on the thumb.

better stones, 150% scaled up

MikeGyverMinis

Marvel United Infinity Gauntlet

Shout out to both MikeGyver here on makerworld and Froggieg on thingiverse for their designs and remixes. &nbsp;I don&#39;t have the game that is required for the original model, but my son wanted a gauntlet, we both liked the way this model looked so I got to work in tinkercad doing my best to make “gems” that can be glued into each slot, each gem slot and gem is unique, use superglue/CA/adhesive of your preference. &nbsp;&nbsp;

Print Profile(2)

Description

Comment & Rating (65)

This remix is based on

License

Remixes (1)

Related Models

Infinity Gauntlet With Printed Gems