J-10C Assembly Version II
Print Profile(3)
Description
Catalog => <Warship-Ship>-<Fighter-Aircraft>-<Vehicle-Tank>-<Aerospace>-<Miniature>-<Mecha>-<Weapon>-<Uncategorized>
Membership
J-10C Assembly Version II
(This version modifies the J-10C Assembly Version: 1. Altered canard wing rotation direction. 2. Modified tail section to a single-piece print. 3. Missile hardpoints redesigned for snap-fit assembly. 4. Landing gear redesigned for snap-fit assembly.)
Missiles are interchangeable with the J-15 Carrier-Borne Aircraft Assembly Version, and the display stand is interchangeable with the J-10C Assembly Version. Please click the green text to download from the linked page.
Due to material shrinkage and print precision limitations, sanding and gluing may be necessary, applying firm pressure.
Before printing, ensure the PEI build plate is thoroughly cleaned, maintaining optimal adhesion, and that the filament is completely dry
The main model measures 152mm in length, uses 28g of filament, and requires 4 hours to print.
Tested on the A1 mini—low-temperature stabilized build plate, Bambu PLA (black & white), 0.12mm layer height, 2 walls, acceleration set to 1000mm/s² or lower.
A brim is included by default. Users confident in their printer and filament may disable it; I did.
Many thanks to all who have followed, liked, downloaded, and boosted this model.
Assembly instructions are available in the J-10C Assembly Version.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)