Ricky Bobby "Fig Newton" Car Magnet - HueForge
Print Profile(1)
Bill of Materials
Description
If you ain’t first, you’re last. 🏁
HueForge magnet of Ricky Bobby’s #26 Wonder Bread car from Talladega Nights, with the “Fig Newtons” decal on the windshield.
Print Details
Setting | Value |
|---|---|
Default Size | 100 x 52.5 x 5.32 mm |
Layer Height | 0.08 mm |
Initial Layer Height | 0.2 mm |
Print Time | 1 hr 32 min |
Filament Used | 23.28 g (5 colors) |
Magnet Holes | 2 × 8x3 mm (resizeable) |
Ironing | On, Optional |
Fan Speed | 0% (Crack front/lid if enclosed) |
Note: For best results, keep the part cooling fan at 0%. If printing in an enclosure, crack the lid or front door to prevent overheating, especially with PLA.
Filament/Layer Change Table
Filament & Transmission Distance (TD) | Swap Layer (Height / #) |
|---|---|
PLA BambuLab Basic Black (TD: 0.3) | Start – 4.04 mm / #48 |
PLA BambuLab Basic Cobalt Blue (TD: 1.2) | 4.04 mm / #49 |
PLA BambuLab Basic Red (TD: 3.5) | 4.20 mm / #51 |
PLA BambuLab Basic Yellow (TD: 5.1) | 4.60 mm / #56 |
PLA BambuLab Matte Ivory White (TD: 3.7) | 5.00 mm / #61 – finish |
5 unique filaments required
If you only have 1 AMS try assigning the Ivory White section to the Black and after it switches to Cobalt Blue pull the Black Filament out of your AMS and replace it with the Ivory White
HueForge Warning:
Do not scale Z! Adjust only X/Y for resizing. If you resize, double-check and edit magnet slot sizes AFTER resizing to fit your magnets.
Boost Me (for free)
I'm still new to sharing my work, hope you enjoy this one! A like, rating, or boost would mean a lot. Let me know if you need any help!
License
Comment & Rating (0)