Holden Special Vehicles (HSV) Clubsport Light Box
Print Profile(3)
Description
This model is a light box for the Holden Special Vehicles Clubsport. Printed on a Bambu Labs P1P using 4 colours in a single AMS.
This version is supplied with a rectangular hole to allow installation of an LED light strip. This is one of my earlier designs and if you want the usual 12mm hole in the back plate, please check out the updated print profile I provided.
This section applies to light boxes
A version without the writing on the back and without the 12mm hole is also available.
Parts that I use in my light boxes
Note: I use components that are readily available through AliExpress. There are many variations of these items that you can use if you can find local suppliers.
| Item | Comment | Link |
| 12V Mains adapter | This is for the AU version, choose one that suits your location (1A) | https://www.aliexpress.com/item/1005003438232392.html |
| LED Strip | I used the 3mm version as it's easier to bend around the light box. Choose the 12V version to match your adapter. The 320 LEDs item is bright enough for a light box. I usually choose the 1m versions - it can be trimmed if needed. | https://www.aliexpress.com/item/1005005626311944.html |
| DC 12v socket | These fit nicely into the back plate of the light box with the pre-made 12mm hole. I solder the LED strip to the socket terminals. Only two pins of the socket are used. | https://www.aliexpress.com/item/1005007870570657.html |
| Inline switch | This inline switch allows you to turn the light box off or on. | https://www.aliexpress.com/item/1005005754107667.html |
License
Comment & Rating (7)