Print Profile(1)
Bill of Materials
Description
Boost Me (for free)
If you find this model useful, please consider boosting it.
Assembly
When you print all of the parts you will need some super glue or 2 part epoxy glue. You will also need a pen spring for the mechnism, specifically 0,3*4*20mm spring. Then follow the bellow image for instructions:
Also dont glue down the button and the rotating gear.
Tolerances
Everything should fit perfectly without the mechanism getting stuck. If the card holder does not move smoothly you can brush the sides with some sand paper.
Card Holding
This wallet is designed to fit standard sized cards with dimensions 85.60 mm by 53.98 mm, and it fits 5 cards. If you have some cards smaller then others, the mechanism may not hold them correctly. You can fix this by having all 5 cards in the wallet.
Filament
I printed mine in PETG but PLA should work aswell.
Design
If you want the same effect as on the picture you need a carbon fiber build plate that you can purchase on Bambu Store if you dont have one already.
I wish you happy printing!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)