Samsung TV Remote TPU Case for TM2360E & -01432D

A TPU cover for the samsung remote BN59-01432D / TM2360E.

Developed this cover in TPU as there seem to be some kind of fundamental law of nature that the remotes always seem to drop no matter how many times the children are told to be careful with them. Printing it in a vibrant color also makes it much easier to find the remote!

The remote was 3D-scanned, geometry reverse engineered and then this cover was modeled after that, giving a great fit to the remote.
The USB-C port is hidden to prevent damage and dirt/dust from entering, but cover is easy to remove if needing to charge the remote (not need to charge it so far in 2 years time, the remote is solar charged after all).

It is made to be printed in a TPU 95 Shore A hardness.
The filament used in the pictures is Polymaker PolyFlex TPU95 Orange.

Please note that if printing this item, make sure the TPU is properly dried, 
and use a build plate that you are familiar with when using TPU.

Bambu Textured PEI Plate does give a great texture to the case, but it's _VERY_ difficult to remove, you need to heat the bed to 80-85C after print has finished, and then pull hard but carefully to remove it from the buildplate. Do this at your own risk!