NEW Sunlu Spool Kit w/Bambu Refills
Print Profile(4)
Description
NEW Sunlu Spool Essentials Kit that Supports Bambu Lab Filament Refills
- For Use with the Revised V3 Sunlu Spools - They Have Small Uniform Holes compared to their prior Sunlu Spools with Larger Non-Uniform Holes
- Print All Pieces With Higher Temperature Filaments to Prevent Warping When Drying (Change in Filament Settings on Handy or BambuSlicer)
- The Refill Shim, Spool Lock, and Filament Clip can be used by itself or all together.
Bambu Filament Refill Shim: For Use with Official Bambu Lab Refills
Prevents Wobble and Loose Spools When Using Bambu Lab Refills on the NEW Sunlu Refillable Spools
Print Instructions: Wait Until Build Plate Completely Cools before removing Shim to Prevent Warping
Assembly Instructions: (Follow Sunlu/Bambu Refill Guides but Insert the Shim Before Filament Refill)
- Insert the Shim Directly Onto the Spool by Aligning the Shim with the Notch on the Sunlu Spool
- Ensure the Shim Sits Flush against the Spool
- Place the Bambu Refill With the Notch Side Directly on Top of the Refill Shim/Spool
- Grab the Other Half of the Sunlu Spool and Align the Arrows to Twist and Securely Lock both halves, Twist till you feel a Slight Click/Bump
Spool Lock: Prevents your Spool from Unwinding by itself:
For Use with Sunlu & Bambu Lab Filament Refills
Assembly Instructions:
- To Install, Insert the Lock Below the Notch at an angle and gently push till flush.
- To Remove, Slide the Shim out and Tip the Spool Over to obtain the Lock.
SUNLU Filament Clips:
For Use When Storing, Drying, and Printing without Damaging your Filament
Compatible with AMS, AMS 2 PRO, AMS HT
Assembly Instructions:
- Align and Snap on - May require some force for Secure Installation
- If it doesn't Snap on, remove and reinsert at a different angle
NOTE:
- Certain Clips may go in Easier due to Variances in the Sunlu Spool Production
- NOTE* If the Clips are Loose Due to Tolerancing, please calibrate your printer's flow, temperature, and/or machine calibrations to prevent jams in the AMS 2 Pro/HT
- Alternatively* a Small Dab of CA Glue into the pins will keep the Clip Permanently Secured - Ensure Proper Filament is Used
- Printing with the Clips installed is Supported as long as they stay on tightly
Desiccant Dryer and Holders Coming Soon…Save this post to your Collection to Stay Tuned!!
Change/Update Logs:
July-06-2025
Slowed down the Spool Locking Shim Print Profile to Allow for Better cooling especially for the upper thinner portion.
Boost Me (for free)
To Support Me, Keep on downloading and printing my designs. Loved my Designs a ton? Then, a Boost along with a Like, Rating, and a Comment would be much appreciated.
Looking forward to seeing what colors you may print with, Enjoy Modding!!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (217)