Switch 2 Ergonomic Grips - 2 Piece - Dockable

Find a the one piece version of this model here: https://makerworld.com/en/models/1492845-switch-2-ergonomic-grips-dockable#profileId-1560760

Note: This could leave polish marks/blemishes where the plastic rubs against the Switch. While it's minor and only cosmetic, be aware that it is a risk. Also, access to the USB while docked is partially blocked by the grip. If you use the dock usb a lot, something like a 90 degree USB adapter maybe beneficial.

2 Piece Nintendo Switch 2 Ergonomic Grips
This is an updated version of the popular handles I originally designed for the Nintendo Switch and Switch OLED. This particular version is made to be printed on smaller printers. People are often surprised at how comfortable they are, especially for extended play sessions. Designed for a snug fit and natural hand positioning, these grips significantly improve handheld comfort. Easy to print and minimal supports required; perfect for everyday use.

Assembly Instructions

1. Check the Fit
   • Before applying any glue, ensure that the two halves of the model fit together properly at the joint.
2. Protect the Switch 2
   • Cover the back of the Nintendo Switch 2 with foil and/or painter’s tape. This will protect the device from glue and make removal easier later.
3. Apply Glue to the Model
   • Apply glue to the mating surfaces of the model halves (not directly on the Switch).
   • Carefully position the glued halves onto the protected Switch 2. This helps ensure the halves are aligned correctly during bonding.
4. Reinforce the Joint (Optional but Recommended)
   • Once the glue has dried, consider reinforcing the joint by:
     • Running a 3D printing pen along the seam, or
     • Carefully using an adjustable soldering iron to fuse the seam.
   • This will strengthen the bond and improve durability.