click fidget toy 35 minutes

This is my first self-created fidget toy. The concept and idea are my own. I hope you like it and have fun with it

• Insert the comb piece into the button: Insert the comb piece centrally into the slider's slot so that it protrudes slightly.
• Clamping: Press the second button side (opposite) against it to securely clamp the comb. The comb should now sit firmly but remain movable.
• Insertion into the housing: Insert the assembled button unit into the housing. Ensure that the slider can move freely up and down.
• Attach the back part: Finally, attach the back part – it holds everything together and provides the necessary stability.

Note:
As this is an early prototype, minor adjustments may still be made. The final version will follow.

This is a minimalist fidget slider consisting of four parts:

• a slider with a click function,
• a structured base with a comb arch,
• a back part for stabilization,
• as well as an integrated sound chamber that amplifies the sound.

Moving the slider produces a satisfying click. When the slider is guided along the comb structure, it generates additional tactile feedback – this makes this small toy particularly fun and unique.
The design is currently still under development, but I would like to share it now, as it does not yet exist in this form on the market. I welcome feedback and suggestions for improvement!

Material Recommendation:
PETG and matte PLA deliver excellent results. PETG ensures a crisp click, matte PLA provides a pleasant feel.

Note:
The optimal print settings – especially 100% infill for the comb – are already included in my attached print profile.

Print Settings:

• Layer height: 0.2 mm

  Support necessary!!

• All parts are easy to print