Smoggy3D

cover

split3.jpg

split2.jpg

wolf_render2.png

Body

plate_1.png

Eyes & Nose

plate_2.png

split1.jpg

No AMS needed!Eyes and nose need to be glued in.

Separate Parts, 2 Plates, 0.12mm layer, 2 walls, 10% infill

ams1.jpg

AMS, 0.12mm layer, 2 walls, 8% infill

Albertox

WhatsApp Image 2025-06-08 at 15.08.26.jpeg

Print profile fully optimized for the small size of the model (only 30mm high). It has a layer height of 0.08 to maintain details despite the size, walls increased to 3 to improve resistance, first layer speed decreased to 40mm/s and first layer filling decreased to 90 this because due to the size you have to favor adhesion, internal wall speed decreased to 150mm/s and internal to 250mm/s, z distance of the upper support set to 0.22 to favor quality but also ease of removal, finally added 5mm of brim to avoid adhesion problems. Feedback is welcome.&nbsp;0.08mm layer, 3 walls, 8% infill

3cm HEIGHT! (read description for print profile details)

Suellen

Wolf_Keychain.jpg

Adaptation that includes a hole in the ear to turn it into a keyring.

0.2mm layer, 2 walls, 8% infill, keychain

B0ngAAA

wolf.jpg

0.12mm layer, 2 walls, 15% infill

The Endless River

PXL_20260708_024708729~2.jpg

PXL_20260708_024714902~2.jpg

PXL_20260708_024726007~2.jpg

PXL_20260708_024918512~2.jpg

Identical to the original with split parts, but everything is on a single plate for both speed and convenience.&nbsp;NOTE: The layout is already perfect for everything from the A1 Mini on up. Unfortunately, MakerWorld handles “print by object” profiles exceptionally poorly and only shows compatibility for the printer from which a profile is saved. If the Handy app doesn’t show it as compatible for yours due to this, open the 3MF in Bambu Studio instead and it should be ready to go, or use Auto Arrange to further optimize for your exact setup.<ul style="list-style-type: disc"><li>Should go without saying, but an AMS is required — unless you add pauses and manually swap filament between objects.</li><li>Be sure the print sequence remains “Print by Object” or you&#39;ll unnecessarily go through a lot of filament and waste a lot of time, completely defeating the purpose of this profile.</li></ul>If you like this profile, please remember to rate it, boost the designer and explore their other models. If you really like this profile, feel free to <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/@TheEndlessRiver/upload">check out my models</a> as well and boost one (or more) of them if you have boosts to spare. 😊

Separate parts, one plate, any printer w/AMS — fast & easy!

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

🐺 Knitted Wolf 🐺No AMS needed! Just glue in the parts.

Knitted Wolf

ASIA

Print Profile(6)

Bill of Materials

Description

Comment & Rating (263)

License

Related Models