Mounting Aid for Swap Mod Hooks

The turntable swap mod is a marvelous addition. However, attaching the hooks (yellow in the images) to the plates presents a minor challenge. Repeatedly, the tiny M2 nut slipped out, preventing me from securing the hook.

To keep the nut in place while screwing, I designed this small tool (orange in the images).

Deburr the hole, if necessary. Insert the nut, place the tool in the groove on the nut, press firmly with a finger, and tighten the screw.

Using threadlocker is recommended. Apply a drop to the screw end and then tighten the last two or three turns to allow for easier distribution within the threads.

While not ideal, this small tool significantly speeds up the process.