Niimbot D Series Label and Accessories Organizer

UPDATE: Huge thanks to @frickelzeugs, who helped me realize a name change was needed since this only works for the NIIMBOT D series labels!

I did finally break down and order a B1 Pro so I can do some measurements and see if it makes sense to make a similar model.  My concern is that if 50mm is the typical width,  there would only be room for four of them. If you did pull this up looking for an organizer for the B’s please do let me know if that is something you need and what kind of features are important to you.  I’m on the fence as far as if that should be a totally new design, or if this should continue with another remix of @iamjorgensen’s great design.  

Thank You!  

Original description:

The long awaited remix of the popular NiimbotD series label organizer, now with onboard storage for the separator and up to four unused dividers.  This update includes dividers in the original “Tight Fit” thickness, a new Snug Fit size and a looser fit one.  Different printer tolerances impact the fit, so I included 1of each size on the Main plate.  The second plate has a full set of each size, either delete the two you don't want to print, or right click and uncheck “printable”.  Snug is recommended for most situations, as it has enough friction to stay in place if you knock over or drop the organizer, while still being easy to move.

If you have already printed the early version of this organizer, you can upgrade by printing out the Lid and one set of the dividers (optional).  The base is unchanged.

To use the storage features, slide up to four extra dividers under the rails inside the lid on either side of the separator dock.  The Niimbot separator has a snug friction fit and will also lock the extra dividers in place when it's docked.